Agawa Canyon BOREAL21 21inch Folding Saw, Camping Saw Outdoors Saw

Description

We are an authorized Agawa Canyon dealer.
This saw is brand new in factory packaging.
Sheaths and extra blades are available in our Ebay Store
Additional Options Include:
- Crazy Horse Leather Sheath
- Emerald Green Canvas Sheath
- Sydney Rancher II
Aggressive
Blade
- All Purpose Blade
- Hunters Blade
Boreal 21 Black
Anodized
Frame/Goldfinch Yellow Handle
Opens in seconds - just unfold, snap into position & start sawing
Automatic blade tensioning with no loose parts
Compact (21"/53cm) & Lightweight (17oz/480g)
High strength extruded and anodized aluminum frame
Stainless steel hardware
Weather resistant glass filled nylon handle
No need to touch the blade while opening & closing
3 hinged, high clearance, trapezium-shaped frame allows large diameter cuts
High clearance geometry - cut up to 6" logs straight through
Simple and fast blade replacement - no special tools
Saw blade safety is designed in - no need to touch the saw blade
If you would like a saw with sheath, check out our other listings
Blade: All Purpose / Green Wood
This medium toothed blade has a double pointed raker between sets of cutting teeth, which clears the cutting notch of wood chips and fiber. This popular style cuts green wood but is right at home cutting dry hard and soft woods. Rust protective coating and hardened points make this versatile blade perfect for most uses.
Open & Close
1. Fold out handle arm from the top all the way around until it rests on the bottom of the top long bar.
2. Pull the pivot arm from inside the top bar and swing all the way around the end of the top bar.
3. The short arm on the end will pivot as you swing the blade around.
4. Rotate the pivot arm away from the blade and rest the small "notch" to the bottom edge of the handle arm.
5. Rotate the pivot arm around the handle until it "snap" closes into place providing automatic tensioning.
6. Reverse instructions to close
Blade Change
1. Use any sturdy flat edge to remove c-clip
2. Slide the grooved pin out and remove the blade
3. Place new blade inside the frame and slide the grooved pin back through the outside hol
4. Use flat edge to snap the c-clip back over the grooved pin
5. Follow same instructions for the other end of the blade