Power Wall Patch Kit Drywall repair repairs holes behind door handles Brand New

Description

1 - Power Wall Patch Kit
Product Description
The Power Wall Patch Kit contains the cutter tool, template and two patches (one smooth, one textured) plus 8 adhesive strips for each patch.
This kit gets you started on fixing holes in wall using a fast, patent pending design.
Power Wall Patch! Patch a hole in 5 minutes, no drywall mud, no backer board, no sanding or taping!
Instructions
Instructions for use of the Power Wall Patch
Clean the area around the hole by dusting and wiping it with a rag approximately a foot around the area to be patched.  Make sure it is dust free.
Holding the template apply two 3M Command Strips on all four sides.
Place the template on the wall with the hole centered, press the template against the wall and make sure it is secure on the wall.
Connect a drill (not included) to the cutter.
Warning: Do not start drill until cutter is against the wall and both drill and cutter handle are firmly in hand.
To begin cutting, place the cutter with the drill inside the hole and run the cutter with the drill around the inside of the template which will create a bigger hole to fit the patch in. DO NOT REMOVE THE TEMPLATE YET.
Vacuum excess dust and debris that is left around the hole and the template.
Run the cutter with the drill around the inside of the template one more time to ensure a precise cut for the patch to fit in. DO NOT REMOVE THE TEMPLATE YET.
Fit the smooth or pre-textured patch into the custom cut out hole. If it fits correctly inside the hole, take the template off of the wall by pulling out on the command strips.
Wall Patches - Apply adhesive or All Purpose Bondo (not included) to the back of the desired patch along the perimeter.
Press the patch into the wall cut out, making sure it is flush with the wall. Wipe off excess adhesive or bondo.
Allow adequate drying time from the label of the adhesive or Bondo that you have chosen.
The pre-textured patch allows the patch to blend in with the texture of the wall. However, some additional texturing may be necessary.
Paint the wall over the patch for absolute blending